Lockers California

Plastic Lockers California | Heavy Duty Polyethylene School, Gym & Workplace Lockers – Cool Lockers®

Low Maintenance & Easy to Clean

15-Year Lockers Warranty

Buy Direct from Manufacturer

Rated Excellent

FAQ’s

Frequently Asked Questions And Answers

Compared to metal or laminate lockers, OzLoka® lockers plastic lockers won’t rust, dent and are UV stabilised, lightweight and water-resistant. Refer to our youtube link – https://www.youtube.com/watch?v=o9NhKkR1mRc

Yes, you can. You can have any colour body from our standard and premium colours. Link to our colour chart. Checkout the locker builder process –  https://www.ozloka.com/locker-builder/

OzLoka® lockers arrived fully assembled and ready for install. No flatpacks or assembly are required.

OzLoka® supply plastic batons and components to attach the locker together in the configuration that is required. However, the components to secure the lockers to a wall need to be supplied by the installer. Refer to our installation guide – https://ozloka.com/wp-content/uploads/2019/04/LOCKER-INSTALLATION-GUIDE_2019.pdf

OzLoka® lockers can be installed either inside or outside (preferably undercover). They are UV stable, water-resistant and heavy-duty. Built for all areas.

OzLoka® lockers are very robust. Whilst most other lockers require maintenance and spare parts for damaged components our lockers require very little maintenance and no spare parts. That is, you can wash out the lockers at the end of the year and clean with soapy water if you wish to remove dirt and in my experience, you will not require any spare parts. Refer to our youtube link – https://www.youtube.com/watch?v=o9NhKkR1mRc

We recycle all of the polyethylene scrap and offcuts we produce in our factory into the shelves, bases and dividers. There is simply not enough recycled polyethylene for our locker manufacturing so we do purchase some virgin PE. All of our lockers are 100% recyclable, in fact in the unlikely event that many years in the future you do not require the lockers we will be happy to 100% recycle them into new lockers.

FSP plastic lockers are suitable for many outdoor environments and are UV stabilized to withstand sun exposure. However, they are not fully waterproof or watertight, and we recommend installing them under some form of overhead cover or shelter wherever possible.

For additional protection in outdoor environments, we offer the following optional features:

• Weathershield: A rubber strip fitted around each compartment opening to help reduce the direct entry of rain and snow.

• Sloping top: Helps rainwater and snow run off the lockers rather than accumulate on top.

While these options provide extra protection, they do not make the lockers fully waterproof or guarantee a completely weatherproof installation. Some moisture may still enter during heavy rain, wind-driven rain, snow, or severe weather conditions.

If installing lockers in a fully exposed outdoor location, these limitations should be considered when determining whether they are suitable for your intended application.

Scroll to top